DTE Systems pedalbox assembly

Step-by-step installation of the DTE Systems pedalbox

The DTE Systems pedalbox is a device that improves the performance of a vehicle's accelerator, which can result in improved acceleration, increased power, and reduced fuel consumption. Installing the pedalbox is very quick and easy, and can be done at home without any technical knowledge.

Necessary tools:

• DTE Systems Pedalbox
• Phillips screwdriver
• Adhesive tape

Steps:

1. Turn off the engine and let it rest for 10 minutes.

2. Locate the throttle connector. The throttle connector is usually located behind the accelerator pedal. Consult your vehicle's owner's manual for more information.

3. Connect the pedalbox to the accelerator connector. The DTE Systems pedalbox comes with connectors specific to each vehicle model. Make sure you connect the pedalbox to the correct connector.

4. Secure the pedal box in an unobtrusive area. You can use adhesive tape to secure the pedal box in an area that will not obstruct the driver or passengers.

5. Stick the controller dial near the dashboard. The controller dial allows you to change the pedalbox's driving modes. Stick the dial where it's easily accessible for the driver.

6. Start the engine and test the pedalbox. Start the engine and test the pedalbox in different driving modes. Make sure the pedalbox is working properly before driving the vehicle.

Warnings:

• Please read the instructions carefully before installation.
• Do not install the pedalbox if you are not sure how to do so.
• Consult a professional if you have any questions.
• Do not drive recklessly or imprudently after installing the pedal box.

Safety Tips:

• Turn off the engine before beginning installation.
• Be careful when working with electrical cables.
• Do not allow children to access the pedal box.

Conclusion

Installing the DTE Systems pedalbox is a simple process that can be done at home in less than 30 minutes. The pedalbox can significantly improve your vehicle's performance and save you money on fuel.