BNP Positioning Structure -K34DIMABNP-
BNP Positioning Structure -K34DIMABNP- is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
BNP Positioning Structure for ECU reading/programming.
the kit DIMA BNP by Sports size It is a tool that allows you to make all the connections between the ECU and the New Trasdata without the need to solder any wires.
The kit consists of:
- 2 “L” metal supports
- 1 transparent perforated platform
- 1 allen key to adjust the supports
- 2 platform retaining screws (with round knurled head)
- 4 needle holder drumsticks
- 4 needles
- 4 connection cables with banana terminals
- 3 cables with alligator clips and free end
Independent structure to avoid welding operations on the ECU board: provided with 4 rods (with needle tips) for contact on microprocessor pins or communication ports to read and program ECUs without the need for soldering. Ideal to use together with K34DIMA (metallic structure) for ECUs that require contact with DIMA adapters and other extra contact(s) (pins)
DIMA BNP kit: instructions for use
Depending on the type of application, the transparent perforated platform can be mounted at two heights. Either with the transparent perforated platform mounted on the shorter profiles of the metal "L" brackets or mounted on the longer profiles (as shown in the image below). To make the connections, it is necessary that the needle holder rods are correctly connected to the needles so that they exert correct pressure. Each rod must be inserted into a hole so that it is as perpendicular as possible and as close to the ECU motherboard.
There is optional drumstick kit + Needles consisting of 4 needle holder drumsticks + 4 needles, available as reference K34ACD_01.
The DIMA BNP can be used alone with New Trasdata or combining it with the classic platform DIMA as shown in the following image:
DIMA BNP (Bed Needles Programmer) Cradle of Programming Needles
Depending on the connections needed, needle holder drumsticks Metal can be connected together by using cables with banana plugs. The following images are examples of different connections:
USE: It is recommended to pay close attention when placing the needles and needle holder sticks, avoid shocks or vibrations on the support surface during all reading and/or writing operations. This type of connection can be very convenient, but if it does not work correctly it can cause damage to the ECU or the components of the DIMA BNP kit.
Dimensione Sport is exempt from any liability in this regard as a result of having used the DIMA BNP kit.
For Technical Assistance (in Spanish) From Monday to Friday from 8:30 a.m. to 1:30 p.m. and from 3:30 p.m. to 7:00 p.m. (GTM +1)
For Technical Assistance (in English or Italian language) From Monday to Friday from 8:30 a.m. to 1:00 p.m. and from 2:00 p.m. to 6:00 p.m. (GTM +1)
Advice without obligation
Advice without obligation
We are here to help you.
Write to our WhatsApp +34 663 78 88 00 or call us directly.
Delivery and shipping
Delivery and shipping
We process your order in less than 24 hours.
We offer fast, insured national and international shipping.
After-Sales Service
After-Sales Service
Enjoy the best after-sales service with official support from the manufacturer.
BNP Positioning Structure -K34DIMABNP-
Secure payments
Payment methods
Make your purchases with your preferred payment method. You can also choose bank transfer on the payment screen when completing your order.
Discover New Trasdata E-GPT
Fully compatible
New Trasdata is an extraordinary tool, capable of supporting the microprocessors used in all types of vehicles in the automotive sector, for reading and programming in BDM, BOOT, JTAG, NBD, BAM, and GPT modes.
If the vehicle's control unit has an " anti-tuning system " with a locked microprocessor, the New Trasdata tool performs a serial communication unlocking operation, restoring the system's operation to allow reading and programming operations via the OBDII socket with New Genius.
Continuous update
It has integrated all the previous functions supported in BDM and BOOT mode, now including the following microprocessors (CPU):
- Freescale/ST MPC56xx SPC56x, Freescale/ST SPC5777C, Freescale SPC577M
- Infineon Tricore, Infineon Tricore Aurix TC2XX
- Mitsubishi MH72xx, MH82xx
- Motorola HC12, MC68xxx, MPC5xx, MPC55xx,
- Nec 76F00xx
- Renesas M32R, SH705x, SH725xx
- ST Microelectronics ST10xxx
A FEW AND VERY SIMPLE STEPS TO BE OPERATIONAL:
New Trasdata allows reading and reprogramming of the entire content of control units: microprocessor (CPU), flash Eprom and serial EEprom .
Thus, even in the event of a blockage, the control unit can be restored to its original condition at any time (backup).
This tool also automatically performs the necessary calculations (checksums) for the correct operation of the vehicle.
A special aluminum platform and a series of specific adapters allow all connections to the control unit to be made without the need for welding.
In specific cases it is possible to perform read/write operations without even opening the control unit.
